EPOXY ANCHORING PRODUCTS
ANCHORMARK
AnchorMark Pty. Ltd., formerly known as fischer Australia, is a global leader in fastening systems, known for its high-performance chemical and mechanical anchoring solutions. Their range of adhesives includes injection mortars and resin capsules designed for secure anchoring in concrete, masonry, and other substrates.
FIS V PLUS 300 T
The injection mortar FIS V PLUS 300 T is a 2-component injection mortar based on vinyl ester (suitable for water filled holes). It is approved for use in cracked and non-cracked concrete, masonry and for special applications.
FIS V PLUS 410 C
The injection mortar FIS V PLUS 410 C is a 2-component injection mortar based on vinyl ester for water filled drill holes. It is approved for use in cracked and non-cracked concrete, masonry and for special applications.
FIS EM PLUS 390 S
The injection system, comprising the epoxy resin mortar FIS EM Plus combined with a threaded rod, is suitable for pre-positioned and push-through installation. The mortar is injected bubble-free from the drill hole base. It can be processed at low temperatures down to 0°C.
FIS SB 390 S
Thanks to its high bond strength, Superbond mortar FIS SB achieves a very high load level for safe use in cracked and non-cracked concrete. The Superbond mortar can even be used at extremely high temperatures of up to +150 °C. This opens up new application fields, where no chemical anchor could be used previously.
ANCHORMARK
AnchorMark Pty. Ltd., formerly known as fischer Australia, is a global leader in fastening systems, known for its high-performance chemical and mechanical anchoring solutions. Their range of adhesives includes injection mortars and resin capsules designed for secure anchoring in concrete, masonry, and other substrates.
FIS V PLUS 300 T
The injection mortar FIS V PLUS 300 T is a 2-component injection mortar based on vinyl ester (suitable for water filled holes). It is approved for use in cracked and non-cracked concrete, masonry and for special applications.
FIS V PLUS 410 C
The injection mortar FIS V PLUS 410 C is a 2-component injection mortar based on vinyl ester for water filled drill holes. It is approved for use in cracked and non-cracked concrete, masonry and for special applications.
FIS EM PLUS 390 S
The injection system, comprising the epoxy resin mortar FIS EM Plus combined with a threaded rod, is suitable for pre-positioned and push-through installation. The mortar is injected bubble-free from the drill hole base. It can be processed at low temperatures down to 0°C.
FIS SB 390 S
Thanks to its high bond strength, Superbond mortar FIS SB achieves a very high load level for safe use in cracked and non-cracked concrete. The Superbond mortar can even be used at extremely high temperatures of up to +150 °C. This opens up new application fields, where no chemical anchor could be used previously.
SIKA
From the basement to the roof, Sika provides an entire range of products for the repair, protection, construction or sealing of your building. With over 100 years experience in supplying products for construction and industry we are confident that we have the perfect solution, no matter what your requirement.
ANCHORFIX 1
Fast curing styrene free chemical anchoring adhesive. Solvent and styrene free based, two-component polyester anchoring adhesive.
ANCHORFIX 3001
An epoxy resin based, 2-part, thixotropic, 1:1 mixing ratio, high performance anchoring adhesive. It is designed for anchoring threaded rods and reinforcement bars in both cracked and uncracked dry or damp concrete.
ANCHORFIX 3030
An epoxy resin based, 2-part, thixotropic, high performance anchoring adhesive for anchoring threaded rods and reinforcing bars in both cracked and uncracked concrete dry or damp concrete.
SIKA
From the basement to the roof, Sika provides an entire range of products for the repair, protection, construction or sealing of your building. With over 100 years experience in supplying products for construction and industry we are confident that we have the perfect solution, no matter what your requirement.
ANCHORFIX 1
Fast curing styrene free chemical anchoring adhesive. Solvent and styrene free based, two-component polyester anchoring adhesive.
ANCHORFIX 3001
An epoxy resin based, 2-part, thixotropic, 1:1 mixing ratio, high performance anchoring adhesive. It is designed for anchoring threaded rods and reinforcement bars in both cracked and uncracked dry or damp concrete.
ANCHORFIX 3030
An epoxy resin based, 2-part, thixotropic, high performance anchoring adhesive for anchoring threaded rods and reinforcing bars in both cracked and uncracked concrete dry or damp concrete.