Liquid Membranes Technical Datasheets
ARDEX specialises in high-quality construction materials for substrate preparation, levelling floors, waterproofing and concrete repair.
Water-based polyurethane-acrylic waterproofing membrane developed for high performance under-tile waterproofing.
(Superflex Two Part) is a tough, fast drying two component waterproofing membrane with synthetic microfibers specifically designed for use under tiles.
A two component water based epoxy polyamide membrane/barrier coating. Approved for use with potable (drinking) water. Water resistant, prevents rising damp, efflorescence and withstands hydrostatic pressure.
One component liquid applied, latex modified, bituminous elastomeric waterproofing membrane. ARDEX WPM 179 is predominately used as a patching or repair membrane.
From foundation to fit-out, Bostik is an international leader in integrated building systems for flooring, tiling, plumbing, concrete repair, waterproofing and sealing.
One part, highly elastic, Class 3, water-based polyurethane waterproofing membrane systems that meets the requirements of AS3740.
An elastomeric, solvent based one part polyurethane membrane used for waterproofing applications.
Two part water based epoxy coating designed as a moisture and vapour barrier membrane to prevent water seepage and permeation through concrete floors. The product shows excellent adhesion and acts as a surface preparation for subsequent adhesives when laying floor coverings of all kinds.
Drizoro is a manufacturer of chemical products for the construction industry, it focuses on supplying speciality mortars designed for waterproofing, concrete repair, flooring and decorative finishes. Drizoro are specialists in negative tanking waterproofing needs.
Flexible UV Stable waterproof coating against positive and negative pressure for concrete and masonry.
One-component cement based mortar. Once mixed only with water, it provides a high-performance flexible coating, for waterproofing and protection of concrete against positive and negative pressure.
Duram Industries Pty Ltd, a 100% Australian owned company, has manufactured on site a comprehensive range of waterproofing and construction products.
Multithane UV is a UV resistant tar free, elastomeric, single pack, moisture curing liquid polyurethane, waterproofing membrane which cures to form an elastic, high tensile and seamless membrane.
Polyurethane fortified water based waterproofing membrane incorporating micro fibers.
Water-based ‘rubberised’ latex / bituminous waterproofing compound incorporating elastomers and reinforcing agents. It is formulated to a brushable consistency, but with sufficient body to provide a high build waterproofing membrane.
Polyurethane / acrylic co-polymer, water based coating which when fully cured, forms an impervious, flexible and aesthetically pleasing waterproofing membrane which enhances the look of the pond or water feature.
A tough, durable, single pack, liquid applied, moisture curing, aromatic polyurethane anti-slip and protective coating. It cures to form a tough, abrasive resistant, semi-flexible coating in an attractive textured finish.
From the basement to the roof, Sika provides an entire range of products for the repair, protection, construction or sealing of your building. With over 100 years experience in supplying products for construction and industry we are confident that we have the perfect solution, no matter what your requirement.
Acrylic based bitumen waterproofing membrane.
One component, flexible, fibre-reinforced mortar, based on cement modified with special alkali-resistant polymers. It also contains fine fillers, selected graded aggregates, plus special waterproofing additives to produce a flexible mortar that is ideal for waterproofing surfaces subject to flexural strain.
Emer-Clad is a highly flexible coating containing additives to inhibit the growth of mould, resist bacterial growth and aggressive elements Resistant to UV light, chloride ion and carbonation attack. Providing an aesthetically pleasing waterproof protective coating and may be applied by brush, roller or airless spray
A high performance water based decorative and protective facade coating. Excellent resistance to UV, weathering, chloride ions and CO².
A thin, load bearing waterproofing/crack isolation membrane that does not require the use of fabric in the field, coves or corners. Single component self curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane that bonds directly to a wide variety of substrates.
Two component, roller applied, breathable epoxy coating specifically
designed to reduce moisture vapour emissions in concrete and other substrates.
News view all articles
Futureproof your build with Australia's most popular and durable construction material
Projects view all articles
Cupolex Installation - Gumnut Lane, Goulburn Project Type: Residential SlabLocation: Goulburn NSW Developer/Builder: MP Hogan Homes & ConstructionsCupolex Products: CUPOLEX® H260 & 350 DomesSlab Size: 500m2+ CE Construction Solutions and MP Hogan Homes and...